York-Shipley Global is one of the leading manufacturers of commercial, industrial, and institutional package boiler systems and auxiliary equipment. With boiler capacities ranging from 7 – 2,200 BHP and pressures from 15 – 300 psig they are prepared to meet your needs with an integrated system.
York-Shipley Global is located in York, Pennsylvania with access to railroads, shipping ports, and interstate highways allowing easy shipping of their products throughout the world. York-Shipley is a division of AESYS Technologies, LLC, and with the other AESYS Companies such as Jackson & Church HVAC Global, Educational Services, and Custom Fabrication, can provide your complete boiler, heating and cooling needs complete with education of operators and maintainers of your equipment. York-Shipley Global Boilers are designed and built to meet the code requirements of the American Society of Mechanical Engineers (ASME), The National Board of Boiler and Pressure Vessel Inspectors (NBBI), Canadian and US UL Listed, American Boiler Manufacturers Association (ABMA), FM Global, GAP, NEMA, National Fire Protection Association (NFPA) and are registered with the NBBPVI as well. York-Shipley Global is poised to help you meet the new EPA MACT Regulations for boiler emissions as well.
The York-Shipley Global Boiler line includes:
Dry-Back Firetube Design Boilers in the 400C and 500C Series with three and four-pass steam & hot water boiler designs operating at 15-300 PSIG. The 400C Series is available in capacities from 30-1,300 BHP, and the 500C Series is available in capacities from 25-1,000 BHP. Standard burners on the Dry-Back Boilers can burn natural or, LP gas, digester gas, and #2-#6 fuel oils or, combinations of fuel, and be configured to meet low emission and high altitude operating requirements. The Dry-Back Boilers utilize a centerline design to achieve a uniform stress increasing the service life, a downdraft design to promote greater heat transfer, and have complete natural water circulation over all the firetubes and the furnace allowing non-dissolved solids to easily fall to the bottom where they can be removed with a blowdown. The front and rear covers are hinged allowing access from both ends for cleaning or, replacement of the tubes.
Water-Back Firetube Design Boilers in the 400L and 500L Series with three and four-pass steam boiler designs operating at 15-300 PSIG. The 400L Series is available in capacities from 25-1,100 BHP, and the 500L Series is available in capacities from 20-1,000 BHP. Standard burners on the Water-Back Boilers can burn natural or, LP gas, digester gas, and #2-#6 fuel oils or, combinations of fuel, and be configured to meet low emission and high altitude operating requirements. The Water-Back Boilers utilize a offset furnace to achieve a low stress design, a large water volume and a liberal steam storage for maintaining swing load operation, and a submerged rear combustion reversing chamber that is cylindrical shaped allow any scale that forms to easily fall to the bottom where they can be removed with a blowdown. The front and rear covers are on davited hinges allowing access for cleaning, maintenance and inspection.
- Vertical Tube Boilers in the Series VTB are available in 7-30 BHP capacities with a small footprint to generate hot water or, steam at 30-150 PSIG. The Series VTB Boilers can burn natural or, LP gas, and #2 fuel oils or, combinations of fuel. The VTB’s have an integral condensate storage tank and the feedwater pump assembly is pre-piped and mounted making the unit self-contained. Options include low emission and high altitude equipment as well as chemical feeds, blowdown separators, water softeners and other controls.
York-Shipley Global also makes heat recovery systems, and their own line of burners in addition to using burners manufactured by many other manufacturers. York-Shipley global is poised to meet your large industrial, commercial, and institutional boiler needs as well has help you comply with the EPA MACT Regulations.
You can obtain additional information by visiting York-Shipley on-line, by writing to them at York-Shipley Global, Division of AESYS Technologies, LLC, 693 North Hills Rd. York, PA 17402-2211 or, by calling 717-755-1081.
