This Kohler Forte Faucet Troubleshooting & Repair Guide will give you easy to follow steps for troubleshooting and repairing Kohler Forte kitchen and lavatory faucets. If you are having problems with a Kohler Forte in most cases following these easy steps and replacing a few inexpensive parts can restore the faucet to operating like new again.
The Kohler Forte Faucets follow the same troubleshooting logic as any other faucet regardless of where they are located or, the number of handles with minor additional steps. If the faucet is not shutting off and continues dripping or, running with a steady stream the problem is almost always a cartridge that requires replacement. If you turn on the faucet and water comes out at a reduced flow or, not at all in most cases you will find the aerator on the end of the spout has clogged with debris and the flow is blocked, you can unscrew it and either clean or, replace the aerator. On kitchen faucets with a side spray that are not flowing you should check the aerator first for debris and if that does not fix the problem, check the side spray to see if it has flow while the spout doesn’t, which will indicate a problem with the diverter sticking. The diverter sticking can also be indicated by water coming out of both the spout and side spray at the same time. In some cases there may be other blockages an the supply lines or, valves coming to the faucet but in most cases you should start at the faucet as it is the easiest place to start checking.
Once you have figured out what parts are malfunctioning and require replacement you are ready to go to the next step of disassembling the faucet and replacing the parts. Before rushing in blindly it is probably a good idea to get a look at the service parts diagram for your faucet to get a picture of how the parts go together. This will help you to get an idea of how to take it apart and put it together again, along with being able to see what parts you will need to purchase and in some cases where only one part is used you can purchase them in advance. Other cases where 2 different parts are used you will have to disassemble to find out what is used on your faucet the buy the parts.
Kohler Forte Single Handle Kitchen Sink Faucets
The Kohler Forte Single Handle Kitchen Sink Faucets are all very similar and the same parts, disassembly and reassembly procedures for cartridge replacement apply to all of the models, which include model numbers K-10411, K-10412, K-10413, K-10414, K-10415, K-10416, K-10430, & K-10433. Turn off the water supply to the faucet, in most cases there are stop valves under the sink that should accomplish this. You should verify the water is off before proceeding with the cartridge replacement by turning the faucet on to both hot and cold to check. Remove the plastic plug button from the rear of the handle and loosen the allen set screw allowing the handle to pull off. Remove the bonnet cover then using an adjustable wrench remove the bonnet nut. Once the bonnet nut is removed you are then able to grip the cartridge and pull it up out of the valve body. You will need a Kohler # GP1016516 replacement cartridge and the new one should be lubricated with some plumbers grease and put back into position with a assembly in the reverse. If there is a problem with the diverter you will need to get deeper into disassembly with the diverter located under the spout. All Kohler single handle side spray faucets use the Kohler # 75878 diverter but you should check the diagram for your faucet as additional parts such as O-Rings will probably be needed when you remove the spout. The K-10433 pull out style faucet does not have a diverter under the spout but does have other components such as a check valve, and screen where the hose connects to the pull out head which should be checked when there are flow problems. Once reassembled turn the water back on and check for proper operation and leaks.
Kohler Forte 2-Handle Wide Spread Kitchen Sink Faucet
Kohler Forte Single Handle Lavatory Faucets
The Kohler Forte Single Handle Lavatory Faucets K-10215-4 & K10217-4 disassemble and reassemble the same as the Kohler Forte single handle kitchen faucets except they use a Kohler # GP1017426 cartridge, and they do not have a diverter or movable spout.
Kohler Forte Wide Spread Two Handle Lavatory Faucets
The Kohler Forte Wide Spread Two Handle Lavatory Faucets K-10272-4 &10272-4A disassemble and reassemble the same as the Kohler Forte two handle wide spread kitchen faucets and use the same two different cartridges Kohler #GP77005 (hot) & GP77006 (hot) or, Kohler #GP1092204 (hot) & GP1092203 (cold). However lavatory faucets do not have a diverter or movable spout.
Kohler Forte Two Handle Centerset Lavatory Faucet
The Kohler Forte Two Handle Centerset Lavatory Faucets K-10270-4 & K10270-4A can be repaired by shutting off the water supply valves usually found under the sink, then they have a ring below the handle, which unscrews for the handle to be removed. Once the handle is removed an adjustable wrench can be used to remove the hot and cold cartridges from the valve body. Only Kohler # GP77005 (hot) & GP77006 (cold) cartridges are used. As always grease the cartridge with plumbers grease and the retaining ring for the handle to assure easy disassembly in the future.
As you can see with a few basic tools and a few parts, in many cases you can easily fix a Kohler Forte Faucet.