The AquaPRO Swimming Pool Heat Pump Heaters are a great way to heat a swimming pool saving up to 85% of the cost of heating with gas. Since heat pumps do not produce heat, but merely transfer the existing heat out of the air into the water using a reverse refrigeration process, the cost of operation is much less expensive.
The AquaPRO Swimming Pool Heat Pump Heaters come in 8 models and 6 sizes capable of heating pools ranging in size from 13,000 to 35,000 gallons of water. The AquaPRO heat pumps offer a coefficient of performance (COP) ranging from 5.3 up to 6.2, which translates to an amazingly efficient way to heat your pool putting 5 to 6 times as much heat into the water for the energy consumed.
AquaPRO has been in the water pump industry for over 75 years and is a leading producer of swimming pool equipment. Their manufacturing facility is certified to ISO9001 and they maintain an on-site UL Testing Lab ensuring quality and safety in all of their products. AquaPRO is based in Harrison, Ohio, and they manufacture a full product line of pool pumps, pool filters, spa blowers, drainage pumps, and pool heat pumps.
The AquaPRO Swimming Pool Heat Pump Heaters are a great way to heat your swimming pool and extend your swimming season to get the most enjoyment possible out of your swimming pool while doing so in the most efficient possible way. The AquaPRO heat pumps are designed to provide heating by having the water running through your filter pass through the heat pump heat exchanger on the way back to the pool without any additional pumping expense. All of the AquaPRO heat pumps use modern scroll compressors for nearly silent operation.
- AquaPRO Model PRO1300H/C delivers both heating and cooling to the pool water keeping the water just right even in the peak of summer and heating in temperatures as low as 38-degrees F. The Pro1300H/C has a titanium heat exchanger and has 125,000 BTU’s of heating which can take care of a pool up to 35,000 gallons in size with water flows of 25-80 gallons per minute flowing through the heater. The PRO1300H/C has a COP of 5.8 and runs on 230-volt single-phase ac power with an operating current of 29-amps. The PRO1300H/C also has electronic temperature control and an automated self-diagnostic system allowing you to troubleshoot problems with on screen diagnostic codes.
- AquaPRO Model PRO1300 has the same specifications, as the Model PRO1300H/C except does not offer cooling.
- AquaPRO Model PRO1100e and Model PRO1100 are the same except the PRO1100 has a manual controller. The Model PRO1100e and Model PRO1100 offer 109,000 BTU’s of heating with a COP of 5.9, heating a pool up to 28,000 gallons in size. The heater can handle water flows between 25 and 80 GPM through its titanium heat exchanger running on 230-volt single phase ac power with an operating current of 26-amps. The PRO1100e has the electronic temperature control and an automated self-diagnostic system allowing you to troubleshoot problems with on screen diagnostic codes. While the Pro1100 has simplified controls with a knob controlling temperature.
- AquaPRO Model PRO800 offers 80,000 BTU of heating with a COP of 6.2, which can heat a pool up to 24,000 gallons in size. The PRO800 can handle water flows from 25 to 80 gallons per minute through its titanium heat exchanger running on 230-volt single-phase ac power with an operating current of 20-amps. The PRO800 offers digital temperature control.
- AquaPRO Model PRO600 has 62,000 BTU of heating capacity with a COP of 5.3, which can heat a pool up to 18,000 gallons in size. The PRO600 can flow between 25 to 60 gallons per minute through its cupronickel heat exchanger with its mechanical temperature knob offering easy to set temperature control. The PRO600 runs on 230-volt single-phase ac power with an operating current of 14-amps.
- AquaPRO Model PRO500 offers 50,000 BTU of heating with a COP of 5.9, which can heat a pool up to 15,000 gallons in size. The PRO500 can handle water flows from 25 to 60 gallons per minute through its titanium heat exchanger running on 230-volt single-phase ac power with an operating current of 17-amps. The PRO500 has digital temperature control.
- AquaPRO Model PRO400 has 42,000 BTU of heating capacity with a COP of 5.4, which can heat a pool up to 13,000 gallons in size. The PRO400 can flow between 25 to 50 gallons per minute through its cupronickel heat exchanger with its mechanical temperature knob offering easy to set temperature control. The PRO400 runs on 230-volt single-phase ac power with an operating current of 10-amps.
AquaPRO has your pool heating needs covered for any pool large to small with their heat pump pool heater line. Make sure that you cover your pool when not in use to stop evaporation loss that be very costly when heating pools especially early and late in the pool season when the temperature difference between the water and air temperatures are highest.
